The Angled Fan Jet nozzle creates an angled sparay of fanning water. As the spray pattern arcs upwards it widens and cascades back to the pond in a wide splash pattern. The nozzle is not water level dependant and can be used to create dramatic effects especially when lighting is used to accentuate the liquid arch the nozzle creates. The thin outlet of the Fan Jet nozzle creates an interesting water film look. By adjusting the flow from your pump you can fine tune the thickness and spray distance of the catapulting water stream. Multiple nozzles can create stunning effects in formal ponds and cement basins in parks especially when creating a ring around a larger fountain or splashing towards the feet of a statue.
Nozzle is 1" female thread.
Ensure that the hose or PVC tubing that connects your pump to the nozzle is a sufficient diameter. Always try to use a pipe with the same diameter as the nozzle to minimize loss of flow from pipe friction.
The following chart is an approximate detailing of various spray heights with various pump flows at required head rating. Ensure your pump gives the recommended flow at the specified head (height).
The Angled Fan Jet is adjusted to 45 degrees angle to provide a maximum distance of jet spray.
Angled Fan Jet Nozzle Display Height |
1" Angled Fan Jet
|
|
Recommended Pump Flow
|
||
1' | 240 GPH at 2' head | |
2' | 300 GPH at 3' head | |
3' | 390 GPH at 4' head | |
4' | 450 GPH at 5' head | |
5' | 510 GPH at 6' head | |
6' | 600 GPH at 7' head |