Little Giant Pump Shut Off Toggle Switches

We recommend this product however we no longer stock this item in our locations. This product is now available on the Amazon Canada network. You can get the best pricing and see available options and shipping times by visiting the product page on Amazon
Note: Atlantic Pond Supply is an Amazon affiliate and may earn a commission on products purchased through Amazon from our website.

These diaphragm style switches are ideal for use in tight spaces where there is no room for the "tether style" floating shut-off switch. The provide protection from damage to pumps from low water conditions.

Diaphragm-Style Shut-Off Switch Features

Protect pump from damage due to low water levels; power cord voltage single-phase, 115 volt
Equipped with a piggyback plug/receptacle connecting submersible pump's electrical cord
Cut-off switch will cut power on submersible pump when the water level in your skimmer drops
As water level returns to normal levels, the switch automatically restores power to the pump
Measures 3.5-inch width by 5-inch height by 1.75-inch depth

Four Shut-Off Switch Models Available

5999008
Turn On Depth: 6" - 9"
Shut Off Depth: 1" - 4"

Volts: 110/115

Max Amps: 10

Cord Length: 10'

5999009
Turn On Depth: 6" - 9"
Shut Off Depth: 1" - 4"

Volts: 110/115

Max Amps: 10

Cord Length: 18'

5999014
Turn On Depth: 2" - 3"
Shut Off Depth: 0.5" - 1.5"

Volts: 110/115

Max Amps: 10

Cord Length: 18'

5999010
Turn On Depth: 6" - 9"
Shut Off Depth: 1" - 4"

Volts: 220/230*

Max Amps: 10

Cord Length: 8' with no plug

Protect pump from damage due to low water levels with the low water pump cut-off switch. This professional series switch will automatically shut your pump off before expensive damage or complete burn up. This switch is equipped with a piggyback plug/receptacle for conveniently connecting your submersible pump's electrical cord. Simply plug your pump's grounded cord into the receptacle in the back of the switch plug.

Once installed, the low water pump cut-off switch will cut power to your submersible pump when the water level in your skimmer drops due to low water levels or dirty, clogged filter media. When the water level returns to normal levels, the switch will automatically restore power to the pump. Under normal water level conditions, approximately 6-inch above the switch, pressure from the water activates the switch, which then offers power to the pump. Use this switch to protect your pump investment.