These PVC knife gate valves are economical, quick acting valves for low pressure applications. They can be easily taken apart and the seals can be changed, even the valve body can be changed, without upsetting the ends that may be glued to your pipes. They offer unrestricted flow and are quick opening, 100 percent water tested at the factory and quite low in cost. These 1 1/2 ” to 4” valves are all PVC with stainless steel shafts, polypropylene knife gates (except for 4”, 6” and 8”, which are stainless steel), and have Santoprene™ seals. The valves listed are all slip by slip.

All sizes are PVC (S x S)

• Pool & Spa
• Irrigation
• Plumbing
• Aquaculture
• Waste Water Control
• Tank Drain Valves
• Septic Systems

Maximum operating pressure:  
1" - 1.5"  = 30 psi @ 70°F
2" = 20 psi @ 70°F
3" - 4" = 15 psi @ 70°F
6" - 8" = 6 psi @ 70°F