Frothy™ Brass Fountain Nozzles

The Frothy brass spray nozzle has a large column jet that rises straight up in a tighter tower and falls in a smaller splash zone than the traditional foamjet or ice tower geyser. The effect a sturdy hose-like geyser. Multiple nozzles can be used to create majestic towers of water of different heights.

IMPORTANT: This nozzle is water level dependent. See diagram below to show correct placement of geyser nozzle at water level.

The final height of your Frothy spray nozzle pattern and the diameter of the outer tiers will depend on the pump flow and the size of the nozzle chosen. Ensure that the hose or PVC tubing that connects your pump to the nozzle is a sufficient diameter. Always try to use a pipe with the same diameter as the nozzle to minimize loss of flow from pipe friction.

The following chart is an approximate detailing of various spray heights with various pump flows at required head rating. Ensure your pump gives the recommended flow at the specified head (height).

Frothy Nozzle Display Height	1/2" Frothy	3/4" Frothy	1" Frothy	1.5" Frothy
	Recommended Pump Flow	Recommended Pump Flow	Recommended Pump Flow	Recommended Pump Flow
1' 3" to 6" Diameter	354 GPH at 2' head	480 GPH at 2' head	1080 GPH at 2' head	1320 GPH at 3' head
2' 4" to 8" Diameter	450 GPH at 5' head	600 GPH at 4' head	1200 GPH at 4' head	1560 GPH at 5' head
3' 5" to 8" Diameter	540 GPH at 9' head	720 GPH at 5' head	1320 GPH at 5' head	1800 GPH at 8' head
4' 7" to 9" Diameter	600 GPH at 12' head	900 GPH at 7' head	1440 GPH at 8' head	2220 GPH at 10' head
5' 10" to 11" Diameter	660 GPH at 15' head	1020 GPH at 8' head	1560 GPH at 10' head	2400 GPH at 10' head
6' 12" to 13" Diameter	780 GPH at 17' head	1080 GPH at 10' head	1680 GPH at 12' head	2640 GPH at 15' head
7' 13" to 14" Diameter	840 GPH at 21' head	1200 GPH at 14' head	1800 GPH at 14' head	2880 GPH at 18' head
8' 14" to 15" Diameter	900 GPH at 24' head	1320 GPH at 18' head	1920 GPH at 16' head	3120 GPH at 20' head