Extension Cords, Transformers, Photocell & Splitters for LED Pond Lights from Aquascape®

Adding splitters and extensions allows you to extend the reach of your Aquascape® pond lighting system. These splitters and extensions fit to the manual lighting transformer.

These are all designed for Aquascape lighting with two-pin connections standard 2-pin quick connects.

12 volt Photocell & Digital Timer
Model: Aquascape 84039
Turns 12 volt, low-voltage lighting on and off at set times. The built-in photocell senses the absence of daylight and automatically turns your lights on at dusk and then off after a set amount of hours, or at dawn according to the schedule you manually set. The timer setting repeats daily, turning lights on at dusk and off at dawn, or on at dusk and off after 4-6 or 8 hours later.

Product Features

Repeats programmed schedule daily
Auto On at dusk / Off at dawn or 4-6-8 hour timer option
Built-in memory setting in case of power loss
Integrates easily with other quick-connect 12 volt components
36" cord
Limited five-year full replacement warranty

Please Note: This unit is weatherproof but not submersible

Connect the 2-pin quick-connect input cord coming from the Photocell & Digital Timer to the quickconnect found on your 12 volt transformer.

Connect the 2-pin quick-connect cord
coming from your lighting component to the 2-pin quick connect output located on the Photocell & Digital Timer.

3-Way Splitter
Model: Aquascape 98489

- 3 lighting connections
- Provides a simple connection of three light fixtures to a single transformer.
- Multiple 3-way quick connect adapters can be chained together to attach additional fixtures.
- Each quick-connect point provides a water tight seal.
- 6' cord with quick connect

6-Way Splitter
Model: Aquascape 84022

- 6 lighting connections
- Provides a simple connection of three light fixtures to a single transformer.
- Multiple 6-way quick connect adapters can be chained together to attach additional fixtures.
- Each quick-connect point provides a water tight seal.
- 6' cord with quick connect

25' Extension
Model: Aquascape 98998

- This new extension cable allows for simple extension of Aquascape lighting up to 25'.
- Quick-connect point provides a water tight seal.

25' Extension with 5 Quick Connects
Model: Aquascape 84023

- 25-foot cable with 5 quick-connect points (at 5 ft. intervals) allows simple extension of Aquascape LED lighting.
- Each quick-connect point provides a water tight seal.