Brilliant Wonders™ Color-Changing PVC Waterfall Weirs- For formal water features and commercial installations the B

CMP Universal control for Brilliant Wonders LED Waterfalls. With one control box, sync your waterfall with LED products from CMP, Pentair, Hayward* and Jandy. Simple to install, and field-programmable.

The transformer for the Smart Sync is an option: 300 W POOL & SPA SAFETY TRANSFORMER, BEIGE STEEL ENCLOSURE, INPUT 120V, OUTPUT 12,13,14V (see photo at bottom of page)

Product Features

Brilliant Wonders® Smart Sync Technology
Sync Brilliant Wonders® LED Waterfall with all CMP LED Products
Compatible with Lighting and Controls from all Major Pool OEMs
Compact Size For Easy Installation, No Specialized Tools Required
Program in the Field with a Simple Dial Control
One Box Controls up to 8ft of LED Waterfalls

Technical Guide

For Brilliant Wonders LED Waterfall ONLY
One Control per 8 Linear Feet of Waterfalls
Combine multiple Smart Sync units to control over 10ft of waterfalls
ETL Certified Class 2
Rated Max 3.0A @ 12VAC
Always Use Low Voltage 12VAC Transformer in Between Pool Controls and Smart Sync Box.
Smart Sync LED Waterfall Control is not designed to control other Brilliant Wonders LED products.

CMP/J-STYLE SYNC INSTRUCTIONS

To operate the light and change colors:

Turn the light ON. The first time the light is turned on, the color sequence will begin with Alpine White. To change color, turn light OFF then back ON within three (3) seconds. Continue turning OFF and ON until the desired light color mode is reached.
When the light is turned off for more than seven (7) seconds, it will remain in the color mode that was currently active when the light was turned off. To RESET the light to the beginning color sequence (Alpine White), turn the light OFF, wait four (4) to six (6) seconds, then turn the light ON.

H-STYLE SYNC INSTRUCTIONS

To operate the light and change colors:

• The H-Style lights are operated through power-cycling; a method of changing modes which requires no special controller or interface. To activate the lights simply turn the power switch ON. To advance to the next programmed light mode, turn the switch OFF then back ON within ten (10) seconds. Whenever the lights have been off for more than sixty (60) seconds, and it is first turned on, they will come on white for 15 seconds, then go back to the last programmed light mode it was running before being powered off.

To sync the light with additional H-STYLE lights:

• The H-Style lights can easily be synced with additional H-Style lights. All lights should be wired to the same switch, this should automatically sync the lights. If the lights get out of sync on the same switch: turn the switch OFF, then wait between eleven (11) and fourteen (14) seconds and turn the switch back ON. When the lights come back on, they should enter program mode number one (1) and be synchronized.

P-STYLE COLOR SELECTION AND SYNC INSTRUCTIONS

To operate the light and change colors:

The P-Style lights can be controlled using a standard wall-mount light switch. Multiple lights can be connected via a junction box to a single switch so that all lights can be switched ON and OFF together. “P” Style Lights are controlled by cycling the AC power from a standard wall switch. By turning the switch ON and OFF a specific number of times, the light activates one of the seven (7) light show modes, fixed colors, and enables the “Hold” and “Recall” feature.
No special sync instructions are required for P-Style lights. The lights will re-sync automatically each time they are powered on.